Institute of Fluid-Flow Machinery
Polish Academy of Sciences

Papers:

1. Turzyński T., Januszewicz K., Kazimierski P., Kardaś D., Hercel P., Szymborski J., Niewiadomski J. The role of additives in improving the flammability and calorific value of leather shavings and the binding of chromium compounds in ash. Waste Management, 163 (2023), 52–60.
   https://doi.org/10.1016/j.wasman.2023.03.033
2. Kardaś D., Polesek-Karczewska S., Wardach-Święcicka I., Turzyński T., Hercel P., Szymborski J., Heda Ł. Thermal performance enhancement of a red-hot air furnace for a micro-scale externally fired gas turbine system. Energy, 282 (2023), 128591.
   https://doi.org/10.1016/j.energy.2023.128591
3. Kardaś D., Polesek-Karczewska S., Wardach-Święcicka I., Turzyński T., Szymborski J., Heda Ł., Hercel P. The red-hot air furnace for an externally fired gas turbine power unit – Designing aspects and performance testing. Applied Thermal Engineering, 236 Part B (2024), 121552.
   https://doi.org/10.1016/j.applthermaleng.2023.121552
4. Adibimanesh B., Polesek-Karczewska S., Bagherzadeh F., Szczuko P., Shafighfard T. Energy consumption optimization in wastewater treatment plants: machine learning for monitoring incineration of sewage sludge. Sustainable Energy Technologies and Assessments, 56 (2023), 103040.
   https://doi.org/10.1016/j.seta.2023.103040
5. Wardach-Święcicka I., Polesek-Karczewska S., Kardaś D. Biomass combustion in the helically coiled domestic boiler combined with the equilibrium/chemical kinetics CFD approach. Applied Mechanics, 4(2) (2023), 779–802.
   https://doi.org/10.3390/applmech4020040
6. Polesek-Karczewska S., Kardaś D. Aspekty numerycznego modelowania procesów transportu w granularnych ośrodkach reaktywnych z relaksacyjnym opisem przepływu ciepła. XXV Jubileuszowy Zjazd Termodynamików 11-14 września 2023, Gdańsk, Książka Referatów, Politechnika Gdańska 2023, pp. 279–282.
7. Kardaś D., Rusanov A., Polesek-Karczewska S., Rusanov R., Wardach-Święcicka I., Turzyński T. Optymalizacja warunków pracy małego układu kogeneracji ciepła i prądu z piecem powietrznym i turbiną gazową. XXV Jubileuszowy Zjazd Termodynamików 11-14 września 2023, Gdańsk, Książka Referatów, Politechnika Gdańska 2023, pp. 140–143.
8. Polesek-Karczewska S., Wardach-Święcicka I., Kardaś D. An in-house numerical code to assist in designing a small-scale red-hot air furnace. Archives of Thermodynamics, 4 (2023).
   https://doi.org/10.24425/ather.2023.149708
9. Wardach-Święcicka I., Kardaś D. Prediction of Pyrolysis Gas Composition Based on the Gibbs Equation and TGA Analysis. Energies, 16 (2023), 1147.
   https://doi.org/10.3390/en16031147
10. Wardach-Święcicka I., Kardaś D. Modelowanie komory spalania hybrydowego silnika rakietowego. XXV Jubileuszowy Zjazd Termodynamików 11-14 września 2023, Gdańsk, Książka Referatów, Politechnika Gdańska 2023, pp. 363–366.
11. Perly B., Wardach-Święcicka I., Kardaś D. Influence of cylinder diameter and position on thermal and hydrodynamic interaction of shedding vortices with the heat exchanger wall, przyjęte do publikacji w materiałach konferencyjnych Springer Lecture Notes in Mechanical Engineering.
12. Kluska J., Ramotowski J. The effect of adding wood and temperature on the carbonization of chicken manure and the properties of biochars. Renewable Energy, 219 (2023), 119446.
    https://doi.org/10.1016/j.renene.2023.119446
13. Szymborski J., Kardaś D. Modelowanie układu zbiornika i wtryskiwacza wrzącego podtlenku azotu jako elementów silnika rakietowego. XXV Jubileuszowy Zjazd Termodynamików 11-14 września 2023, Gdańsk, Książka Referatów, (2023), pp. 339–342 ISBN/ISSN: 978-83-7348-895-3
14. Januszewicz K., Hunicz J., Kazimierski P., Rybak A., Suchocki T., Duda K., Mikulski M. An experimental assessment on a diesel engine powered by blends of waste-plastic-derived pyrolysis oil with diesel. Energy, 281 (2023), 128330.
    https://doi.org/10.1016/j.energy.2023.128330
15. Suchocki T., Kazimierski P., Lampart P., Januszewicz K., Białecki T., Gawron B., Janicka A. A comparative study of pentanol (C5 alcohol) and kerosene blends in terms of gas turbine engine performance and exhaust gas emission. Fuel, 334 (2023), 126741.
    https://doi.org/10.1016/j.fuel.2022.126741
16. Kosmela P., Kazimierski P. Comparison of the Efficiency of Hetero- and Homogeneous Catalysts in Cellulose Liquefaction. Materials, 16(18) (2023), 6135.
    https://doi.org/10.3390/ma16186135
17. Kazimierski P., Januszewicz K., Hercel P., Kardaś D. Experimental and numerical analysis of the pyrolysis dynamics of a single wood particle: presentation of the radiographic technique. Wood Science and Technology, 57(5) (2023), 1157–1173.
    https://doi.org/10.1007/s00226-023-01486-2
18. Barczak B., Łuczak J., Kazimierski P., Klugmann-Radziemska E., Lopez G., Januszewicz K. Exploring synergistic effects in physical-chemical activation of Acorus calamus for water treatment solutions. Journal of Environmental Management, 347 (2023), 119000.
    https://doi.org/10.1016/j.jenvman.2023.119000
19. Kazimierski P., Kosmela P., Piersa P., Szufa S. Pyrolysis and Torrefaction—Thermal Treatment of Creosote-Impregnated Railroad Ties as a Method of Utilization. Materials, 16(7) (2023), 2704.
    https://doi.org/10.3390/ma16072704
20. Wrzesińska-Jędrusiak E., Czarnecki M., Kazimierski P., Bandrów P., Szufa S. The Circular Economy in the Management of Waste from Leather Processing. Energies, 16(1) (2023), 564.
    https://doi.org/10.3390/en16010564
21. Wantuła M., Kardaś D. Redukcja emisji kotła biomasowego przy zastosowaniu filtrów ceramicznych. XXV Jubileuszowy Zjazd Termodynamików 11-14 września 2023, Gdańsk, Książka Referatów, Politechnika Gdańska 2023, pp. 359–362.

Papers:

1. Turzyński T., Kluska J., Kardaś D. Study on chicken manure combustion and heat production in terms of thermal self-sufficiency of a poultry farm. Renewable Energy, 191 (2022), 84–91.
   https://doi.org/10.1016/j.renene.2022.04.034
2. Kluska J. Possible Utilization of Distillery Waste in the Carbonization Process. Materials, 15 (2022), 7853.
   https://doi.org/10.3390/ma15217853
3. Wiśniewska P., Zedler Ł., Marć M., Klein M., Haponiuk J., Formela K. Ground Tire Rubber Modified by Elastomers via Low-Temperature Extrusion Process: Physico-Mechanical Properties and Volatile Organic Emission Assessment. Polymers, 14 (2022) 546.
   https://doi.org/10.3390/polym14030546
4. Szymborski J., Kardaś D. Novel model for emptying of a self-pressurised nitrous oxide tank. Archives of Thermodynamics, 43(3) (2022), 141–173.
   https://doi.org/10.24425/ather.2022.143176
5. Kardaś D., Wardach-Święcicka I., Grajewski A. Partially transient one-dimensional thermal-flow model of a heat exchanger, upwind numerical solution method and experimental verification. Archives of Thermodynamics, 43(4) (2022), 63–83.
   https://doi.org/10.24425/ather.2022.144406
6. Turzyński T., Kardaś D., Polesek-Karczewska S., Wardach-Święcicka I., Heda Ł., Szymborski J., Hercel P. Design and tests of a high temperature air furnace for an externally fired gas turbine. 14th International Conference on Boiler Technology (ICBT 2022), October 25th -28th 2022, Szczyrk, Poland.
7. Kardaś D., Klonowicz P., Polesek-Karczewska S., Żywica G. Aspekty techniczne małej siłowni gazowej na biomasę ze szczególnym uwzględnieniem wysokotemperaturowego pieca powietrznego, Prace naukowe KMiUE Politechniki Śląskiej, 2022.
8. Ryms M., Januszewicz K., Haustein E., Kazimierski P., Lewandowski W.M. Thermal properties of a cement composite containing phase change materials (PCMs) with post-pyrolytic char obtained from spent tyres as a carrier. Energy, 239 Part A (2022), 121936.
   https://doi.org/10.1016/j.energy.2021.121936

Papers:

1. Kantorek M., Jesionek K., Polesek-Karczewska S., Ziółkowski P., Stajnke M., Badur J. Thermal utilization of meat-and-bone meal using the rotary kiln pyrolyzer and the fluidized bed boiler – the performance of pilot-scale installation. Renewable Energy, 164 (2021), 1447–1456.
   https://doi.org/10.1016/j.renene.2020.10.124
2. Kardaś D., Hercel P., Wardach-Święcicka I., Polesek-Karczewska S. On the kinetic rate of biomass particle decomposition - Experimental and numerical analysis. Energy, 219 (2021), 119575.
   https://doi.org/10.1016/j.energy.2020.119575
3. Kardaś D., Polesek-Karczewska S., Tiutiurski T., Wardach-Święcicka I. Applying dynamic mesh to examine evolution of effective thermal conductivity in porous medium undergoing macrostructure change. Applied Thermal Engineering, 187 (2021), 116583.
   https://doi.org/10.1016/j.applthermaleng.2021.116583
4. Adibimanesh B., Bagher Ayani M., Khozeymeh-Nezhad H., Polesek-Karczewska S. Applying response surface method to optimize the performance of a divergent-chimney solar power plant. Sustainable Energy Technologies and Assessments, 48 (2021), 101593.
   https://doi.org/10.1016/j.seta.2021.101593
5. Kantorek M., Jesionek K., Polesek-Karczewska S., Ziółkowski P., Badur J. The Staged Combustion of Meat-and-Bone Meal: The Characteristics of Conversion Sub-processes and Large-Scale Process Outputs. Chapt. 16 in: Innovative Renewable Waste Conversion Technologies (Ed.: Lazaroiu G., Mihaescu L.), Springer, Cham., 2021.
   https://doi.org/10.1007/978-3-030-81431-1
6. Polesek-Karczewska S., Wardach-Święcicka I., Kardaś D., Turzyński T. Application of a Lumped Multi-Section Model for Analyzing the Thermal Performance of a Small-Scale Biomass Boiler. Journal of Thermal Science, 30(3) (2021), 1034–1045.
   https://doi.org/10.1007/s11630-021-1385-8
7. Dudyński M., Dudyński, K., Kluska J., Ochnio M., Kazimierski P., Kardaś D. Gasification of leather waste for energy production: Laboratory scale and industrial tests. International Journal of Energy Research, 45(13) (2021), 18540–18553.
   https://doi.org/10.1002/er.6966
8. Suchocki T., Witanowski Ł., Lampart P., Kazimierski P., Januszewicz K., Gawron B. Experimental investigation of performance and emission characteristics of a miniature gas turbine supplied by blends of kerosene and waste tyre pyrolysis oil. Energy, 215 (2021), 119125.
   https://doi.org/10.1016/j.energy.2020.119125
9. Turzyński T., Kluska J., Ochnio M., Kardaś D. Comparative analysis of pelletized and unpelletized sunflower husks combustion process in a batch-type reactor. Materials, 14 (2021), 2484.
   https://doi.org/10.3390/ma14102484
10. Wardach-Święcicka I., Kardaś D., Modelling thermal behaviour of a single solid particle pyrolysing in a hot gas flow. Energy, 221 (2021), 119802.
    https://doi.org/10.1016/j.energy.2021.119802
11. Tiutiurski P., Hercel P., Telega J., Kardaś D. Measurements of Water-Air Flow Phenomena in a Chamber with a Rotating Shaft. Journal of Thermal Science, 30 (2021), 242–247.
    https://doi.org/10.1007/s11630-020-1265-7
12. Kazimierski P., Hercel P., Suchocki T., Smoliński J., Pladzyk A., Kardaś D., Łuczak J, Januszewicz K. Pyrolysis of Pruning Residues from Various Types of Orchards and Pretreatment for Energetic Use of Biochar. Materials, 14(11) (2021), 2969.
    https://doi.org/10.3390/ma14112969
13. Suchocki T., Witanowski Ł., Lampart P., Kazimierski P., Januszewicz K., Gawron B. Experimental investigation of performance and emission characteristics of a miniature gas turbine supplied by blends of kerosene and waste tyre pyrolysis oil. Energy, 215 (2021), 119125.
    https://doi.org/10.1016/j.energy.2020.119125

Papers:

1. Januszewicz K., Kazimierski P., Klein M., Kardaś D., Łuczak J. Activated carbon produced by pyrolysis of waste wood and straw for potential wastewater adsorption. Materials, 88 (2020), 2047.
   https://doi.org/10.3390/ma13092047
2. Januszewicz K., Cymann-Sachajdak A., Kazimierski P., Klein M., Łuczak J., Wilamowska-Zawłocka M. Chestnut-derived activated carbon as a prospective material for energy storage. Materials, 88 (2020), 4658.
   https://doi.org/10.3390/ma13204658
3. Januszewicz K., Kazimierski P., Suchocki T., Kardaś D., Lewandowski W., Klugmann-Radziemska E., Łuczak J. Waste tyres pyrolysis for obtaining limonene. Materials, 13 (2020), 1359.
   https://dx.doi.org/10.3390%2Fma13061359
4. Januszewicz K., Kazimierski P., Kosakowski W., Lewandowski W. Waste rubber pyrolysis: Product yields and limonene concentration. Materials, 13 (2020), 4435.
   https://doi.org/10.3390/ma13194435
5. Kazimierski P., Hercel P., Kardaś D. Dynamics of movement and heat transfer for biomass particles in downdraft gasifier - Experimental measurements with the use of radiographic methods. Fuel Processing Technology, 210 (2020), 106555.
   https://doi.org/10.1016/j.fuproc.2020.106555
6. Kazimierski P., Vieira S., Kardaś D. Pine wood particles pyrolysis and radiographic analysis. Drvna Industrija, 71 (2020), 13–18.
   https://doi.org/10.5552/drvind.2020.1834
7. Kazimierski P., Hercel P., Januszewicz K., Kardaś D. Pre-treatment of furniture waste for smokeless charcoal production. Materials, 13 (2020), 3188.
   https://doi.org/10.3390/ma13143188
8. Kluska J. , Ochnio M., Kardaś D. Carbonization of corncobs for the preparation of barbecue charcoal and combustion characteristics of corncob char. Waste Management, 105 (2020), 560–565.
   https://doi.org/10.1016/j.wasman.2020.02.036
9. Kluska J., Turzyński T., Ochnio M., Kardaś D. Characteristics of ash formation in the process of combustion of pelletised leather tannery waste and hardwood pellets. Renewable Energy, 149 (2020), 1246–1253.
   https://doi.org/10.1016/j.renene.2019.10.122
10. Ochnio M., Kluska J., Kardaś D. Effects of biochar and ash outflow during updraft partial gasification on process parameters in a moving bed reactor. Chemical Papers, 74 (2020), 4047–4055.
    https://doi.org/10.1007/s11696-020-01214-1
11. Polesek-Karczewska S., Kardaś D., Wardach-Święcicka I. Effect of heterogeneous tar condensation on coking pressure dynamics – Qualitative numerical analysis. Energy, 207 (2020), 118214.
    https://doi.org/10.1016/j.energy.2020.118214
12. Ryms M., Januszewicz K., Kazimierski P., Łuczak J., Klugmann-Radziemska E., Lewandowski W. Post-pyrolytic carbon as a phase change materials (PCMs) carrier for application in building materials. Materials, 13 (2020), 1268.
    https://doi.org/10.3390/ma13061268

Papers:

1. Kluska J., Ochnio M., Kardaś D., Heda Ł. The influence of temperature on the physicochemical properties of products of pyrolysis of leather-tannery waste. Waste Management, 88 (2019), 248–256. https://doi.org/10.1016/j.wasman.2019.03.046.
2. Kardaś D., Hercel P., Polesek-Karczewska S., Wardach-Święcicka I. A novel insight into biomass pyrolysis - The process analysis by identifying timescales of heat diffusion, heating rate and reaction rate. Energy, 189 (15 December 2019) 116159, doi.org/10.1016/j.energy.2019.116159.
3. Kluska J., Ronewicz K., Kardaś D. Thermal characteristics of single wood particle pyrolysis using particle image velocimetry. International Journal of Thermal Sciences, 135 (2019) 276–284, https://doi.org/10.1016/j.ijthermalsci.2018.09.020
4. Kantorek M., Jesionek K., Polesek-Karczewska S., Ziółkowski P., Badur J. Thermal utilization of meat and bone meals. Performance analysis in terms of drying process, pyrolysis and kinetics of volatiles combustion. Fuel, 254 (2019), 115548, https://doi.org/10.1016/j.fuel.2019.05.131.
5. Kazimierski P., Hercel P., Kardaś D. Determining the bed settling rate in down-draft bio-mass gasifier using the radioisotope X-ray fluorescence - Measurement methodology. Biomass and Bioenergy, 127 (August 2019), 105285, doi.org/10.1016/j.biombioe.2019.105285
6. Kosmela, P., Gosz, K., Kazimierski, P., Hejna, A., Haponiuk, J.T., Piszczyk, Ł., Chemical structures, rheological and physical properties of biopolyols prepared via solvothermal liquefaction of Enteromorpha and Zostera marina biomass, Cellulose Volume 26, Issue 10, 15 July 2019, Pages 5893–591
7. Hejna A., Klein M., Saeb M.R., Formela K. Towards understanding the role of peroxide initiators on compatibilization efficiency of thermoplastic elastomers highly filled with reclaimed GTR. Polymer Testing, 73 (February 2019), 143–151.
8. Kluska J., Turzyński T., Ochnio M., Kardaś D. Characteristics of ash formation in the process of combustion of pelletised leather tannery waste and hardwood pellets. Renewable Energy, https://doi.org/10.1016/j.renene.2019.10.122.
9. Polesek-Karczewska S., Wardach-Święcicka I., Kardaś D., Turzyński T. Application of a lumped multi-section model for analyzing the thermal performance of the small-scale ORC biomass-fired boiler, 2019, Journal of Thermal Sciences,
10. Parnicka P., Grzyb T., Mikolajczyk A., Klein M., Zaleska-Medynska A., Nadolna J. Experimental and theoretical investigations of the influence of carbon on a Ho ³⁺ -TiO 2 photocatlyst with Vis response. Journal of Colloid and Interface Science, 549 (1 August 2019), 212–224.
11. Piszcz-Karaś K., Klein M., Hupka J., Łuczak J. Utilization of shale cuttings in production of lightweight aggregates. Journal of Environmental Management, 231 (1 February 2019), 232–240.
12. Kluska J., Kazimierski P., Ochnio M., Kardaś D. Influence of Bed Movement and Amount of Supplied Air on Updraft Gasification of Hardwood Pellet. Drvna industrija, 69 (2018), 339–347. https://doi.org/10.5552/drind.2018.1764

1.      Kardaś, D., Kluska, J., Kazimierski, P., The course and effects of syngas production from beechwood and RDF in updraft reactor in the light of experimental tests and numerical calculations Thermal Science and Engineering Progress, vol 8, 2018  pp. 136–144

2.      J. Kluska, T. Turzyński, D. Kardaś.  Experimental tests of co-combustion of pelletized leather tannery wastes and hardwood pellets. Waste Management 79 (2018) 22–29.

3.      J. Kluska, K. Ronewicz, D. Kardaś, Characteristics of single wood particle pyrolysis using particle image velocimetry, Archives of Thermodynamics, Volume 39, Issue 2, 2018, Pages 3–13

4.      J. Kluska, K. Ronewicz, D. Kardaś. Thermal characteristics of single wood particle pyrolysis using particle image velocimetry. International Journal of Thermal Sciences 135 (2019) 276–284

5.      J. Kluska, M. Ochnio, P. Kazimierski,  D. Kardaś. Comparison of downdraft and updraft gasification of biomass in a fixed bed reactor. Archives of thermodynamics Vol. 39(2018), No. 4, 83–93

6.      Polesek-Karczewska S., Turzyński T., Kardaś D., Heda Ł. Front velocity in the combustion of blends of poultry liter with straw, Fuel Process. Technol. 176 (2018), 307–315.

7.      Towards understanding the role of peroxide initiators on compatibilization efficiency of thermoplastic elastomers highly filled with reclaimed GTR, Hejna, A., Klein, M., Saeb, M.R., Formela, K.; 2019 Polymer Testing

8.      Utilization of shale cuttings in production of lightweight aggregates, Piszcz-Karaś, K., Klein, M., Hupka, J., Łuczak, J. 2019 Journal of Environmental Management

9.      Synergistic effects of bitumen plasticization and microwave treatment on short-term devulcanization of ground tire rubber, Zedler, Ł., Klein, M., Saeb, M.R., Cañavate, J., Formela, K.; 2018 Polymers

10.   Structure and performance properties of environmentally-friendly biocomposites based on poly(ɛ-caprolactone) modified with copper slag and shale drill cuttings wastes, Hejna, A., Piszcz-Karaś, K., Filipowicz, N., Klein, M., Formela, K. 2018 Science of the Total Environment

11.   Two-step Conversion of Crude Glycerol Generated by Biodiesel Production into Biopolyols: Synthesis, Structural and Physical Chemical Characterization, Hejna, A., Kosmela, P., Klein, M., Haponiuk, J., Piszczyk, Ł. 2018 Journal of Polymers and the Environment

12.   Rheological properties, oxidative and thermal stability, and potential application of biopolyols prepared via two-step process from crude glycerol, Hejna, A., Kosmela, P., Klein, M., Haponiuk, J., Piszczyk, Ł. 2018 Polymer Degradation and Stability

13.   Structural, mechanical and thermal behavior assessments of PCL/PHB blends reactively compatibilized with organic peroxides, Przybysz, M., Marć, M., Klein, M., Saeb, M.R., Formela, K. 2018 Polymer Testing

14.   Structure, Mechanical, Thermal and Fire Behavior Assessments of Environmentally Friendly Crude Glycerol-Based Rigid Polyisocyanurate Foams, Hejna, A., Kosmela, P., Kirpluks, M.,   Haponiuk, J., Piszczyk, Ł. 2018 Journal of Polymers and the Environment

15.   Effective method of treatment of effluents from production of bitumens under basic pH conditions using hydrodynamic cavitation aided by external oxidants, Boczkaj, G., Gągol, M., Klein, M., Przyjazny, A. 2018 Ultrasonics Sonochemistry

16.   On the Correlation of Lignocellulosic Filler Composition with the Performance Properties of Poly(ε-Caprolactone) Based Biocomposites, Hejna, A., Sulyman, M., Przybysz, M., Klein, M., Formela, K. 2018 Waste and Biomass Valorization

Papers:

1. S. Polesek-Karczewska, D. Kardaś, I. Wardach-Święcicka, A. Grucelski, S. Stelmach,
   Transient one-dimensional model of coal carbonization in a stagnant packed bed,
   Archives of Thermodynamics, 2013, Vol. 34, No. 2, pp. 39–51.
2. K. Ronewicz, T. Turzyński, D. Kardaś,
   Design and distribution of air nozzles In the biomass boiler assembly,
   Transactions of the Institute of Fluid-Flow Machinery No 125 (2013), 13–28.
3. T. Turzyński, D. Kardaś,
   Experimental research on helical coil biomass boiler with oil as a heating fluid,
   Transactions of the Institute of Fluid-Flow Machinery No 125 (2013), 55–65.
4. I. Wardach-Święcicka, D. Kardaś,
   Modeling of heat and mass transfer during thermal decomposition of a single solid fuel particle,
   Archives of Thermodynamics, Vol. 34, 2013, No. 2, pp. 53–71, Wydawnictwo IMP PAN, ISSN 1231-0956

1. K. Ronewicz, T. Turzyński, D. Kardaś,
   Modelowanie procesów przepływowych i wymiany ciepła w kotle rusztowym na biomasę,
   Archiwum Spalania Vol. 12 (2012) Nr 3, str. 101–108, ISSN 1641-8549
2. Klein Marek, Kazimierski Paweł, Kluska Jacek, Kardaś Dariusz,
   Przebieg i analiza produktów wolnej i szybkiej pirolizy biomasy,
   W : Ekoenergetyka - biogaz. - Wyniki badań, technologie, prawo i ekonomika w rejonie Morza Bałtyckiego, red. nauk. A. Cenian, J. Gołaszewski, T. Noch. - Gdańsk : GSW, 2012. - S. 96–104. - ISBN 978-83-89762-41-2
3. Klein Marek, Klein Maciek, Kluska Jacek, Kardaś Dariusz,
   Analiza porównawcza olejów z pirolizy opon oraz pirolizy biomasy, pod względem użyteczności jako paliwa,
   W : Ekoenergetyka - biogaz. - Wyniki badań, technologie, prawo i ekonomika w rejonie Morza Bałtyckiego / red. nauk. A. Cenian, J. Gołaszewski, T. Noch. - Gdańsk : GSW, 2012. - S. 104–111. - ISBN 978-83-89762-41-2
4. I. Wardach-Święcicka, D. Kardaś, J. Pozorski,
   Modelling of interactions between variable mass and density solid particles and swirling gas steam,
   13th European Turbulence Conference (ETC13): Reacting, Compressible, Multi-phase and Cryogenic Flows, IOP PUBLISHING LTD, Journal of Physics Conference Series, vol. 318, 2011, 13/11, ETC13,12–15.09.2011, Warsaw, Published online; 22.12.2011, ISSN 1742-6596.
5. I. Wardach-Święcicka, D. Kardaś,
   Modeling of combustion process in pulverized coal burner, Thermodynamcs in Science and Technology,
   Proceedings of the 1st International Congress of Thermodynamics, Poznań University of Technology, Poznań, 4–7.09.2011, Part 2, pp. 982–990.
6. I. Wardach-Święcicka, D. Kardaś,
   Modeling of solid fuel particles combustion,
   Proceedings of the 7th International Symposium on Turbulence, Heat and Mass Transfer, Palermo, Italy, 24–27.09.2012, pp. 769–772, ISBN 978-1-56700-301-7 (short paper) and  Proceedings on CD (full paper).

1. S. Stelmach, D. Kardaś, S. Polesek-Karczewska,
   Eksperymentalna weryfikacja niefourierowskiego modelu transportu ciepła w koksowanym wsadzie węglowym,
   Karbo 3/2011, 156–165.
2. Marek Klein, Jacek Kluska, Sebastian Misiuk, Dariusz Kardaś,
   Przebieg i produkty procesu pirolizy wybranych tworzyw sztucznych w reaktorze ciśnieniowym,
   Inżynieria i Aparatura Chemiczna. - 2011, nr 5, s. 54–55 : 6 rys., 2 tab. - Bibliogr. 4 poz. - ISSN 0368-0827
3. J. Kluska, M. Klein, D. Kardaś,
   Thermochemical analysis of biomass gasification In fixed bed gasifier,
   International Conference on Carbon Reduction Technologies, 19-22.09.2011. ISBN 978-83-61506-06-5
4. I. Wardach-Święcicka, D. Kardaś,
   Modeling of single solid fuel particle combustion in a free stream flue gases,
   XIX Polish National Fluid Dynamics Conference KKMP2010, Poznań University of Technology, Poznań, 5-9.09.2010, Poland, electronic proceedings.

1. D. Kardaś, 2010,
   Modelowanie procesów cieplno-przepływowych w kotłach energetycznych,
   Zeszyt Naukowy IMP PAN, Nr 553/1512/2010, 2010.
2. T. Lewandowski, T. Ochrymiuk, J. Czerwińska, 2010,
   Modeling of heat transfer in microchannel gas flow,
   Journal of Heat Transfer, vol. 132, 2010.
3. I. Wardach-Święcicka, D. Kardaś, 2010,
   Modeling of single solid fuel particle combustion in a free stream flue gases,
   Proc. The 19th Polish National Fluid Dynamics Conference KKMP2010, 05-09 September 2010.
4. D. Kardaś, S. Polesek-Karczewska, 2010,
   Simulation of heat and mass transfer in a retort biomass burner,
   Chemical and Process Engineering, 2010, vol. 31, pp. 753–765.
5. I. Wardach, A. Cenian, 2010,
   Odpady biodegradowalne w Województwie Pomorskim, Ekoenergetyka – zagadnienie technologii, ochrony środowiska i ekonomiki,
   Materiały konferencyjne Międzynarodowego Spotkania Klastrów Ekoenergeycznych, 10-12.05.2010, IMP PAN Gdańsk, str. 195–223.
6. J. Kluska, D. Kardaś, 2010,
   Modeling of chemical and physical processes in reactive porous bed,
   Copernican Letters 1 (2010) 126–134; ISSN 2082 968X