Peer Review Process

  • Each manuscript is assigned an individual number that is used in all correspondence regarding the publication process.
  • Each submission is initially screened by Editor-in-Chief for its novelty and correspondence to the journal scope. Manuscripts that don’t suit the journal scope or lacking in originality may be declined by Editor-in-Chief and returned to the authors without review.
  • The journal uses a double-blinded peer review system. Editor-in-Chief appoints a minimum of 2 Reviewers from institutions other than the authors affiliation and handles the review process. In case of Polish submissions at least one referee is selected from abroad. Authors are requested to suggest potential Reviewers of their manuscript. However, final selection of Reviewers is made exclusively by Editor-in-Chief.
  • The review and manuscript processing takes place within the Editorial System
    https://www.editorialsystem.com/docs/EditorialSystem_Specification_EN.pdf
  • The Reviewer submits the evaluation sheet to the Editorial System at https://www.editorialsystem.com/aot/ with a statement proposing either paper rejection or paper acceptance with one of the following options:
    • in the form as submitted,
    • after minor review agreed with the editor,
    • after essential improvements agreed with the reviewer.
  • Following the receipt of the reviews containing a unanimous conclusion with respect to the paper acceptance or rejection the Editor-in-Chief takes up a decision about the paper acceptance or rejection. The Editorial Office releases to Authors part of the review justifying the decision about publication, without information about the Reviewers.
  • The Editorial Office asks Authors of the contribution to introduce relevant correction and enhancements suggested by Reviewers and/or Editorial Office. Based on the obtained recommendations from Reviewers and response of Authors, Editor-in-Chief makes an ultimate decision about acceptance of the manuscript or its rejection for publication.
  • Editor-in-Chief may appoint an Editor with expertise in the relevant field, who is fully responsible for further handling the paper and giving an ultimate decision about its acceptance or rejection.
  • The review process should not exceed the period of 3 months.
  • Once a year the Editorial Office places on the journal website an up-to-date list of collaborating Reviewers.

Review Board 2023-2025

Archives of Thermodynamics relies upon the expert assessment to maintain the high publication standards. All submitted manuscripts have been reviewed by at least two reviewers to  ensuring the quality and relevance of the published papers.

We appreciate their time and efforts in evaluating manuscripts as well as assistance with the improvement of recommend ones, and express our sincere thanks for their completely voluntary and uncompensated work.

List of Reviewers (2025)
Prof. Ibrahim Abbas Sohag University, Egypt
Dr. Aissa Abderrahmane University of Mascara, Algeria
Dr. Wojciech Adamczyk Silesian University of Technology, Gliwice, Poland
Dr. Naseem Ahamad IILM College of Engineering and Technology, Greater Noida, India
Prof. Mohamad Ahamat Universiti Kuala Lumpur, Malaysia
Dr. Saif Ahmad National Institute of Technology, Patna, India
Prof. Noreen Akbar Prince Mohammad Bin Fahd University, Saudi Arabia
Dr. MKS Al-Ghezi University of Technology - Iraq, Baghdad, Iraq
Dr. Noor Alam Nawab Shah Alam Khan College of Engineering and Technology, New Malakpet, Hyderabad, India
Prof. Hafiz Ali King Fahd University of Petroleum and Minerals, Saudi Arabia
Dr. Ramzan Ali University of Doha for Science and Technology, Qatar
Dr. Amiri Delouei University of Bojnord, Iran
Prof. Rafał Andrzejczyk Gdansk University of Technology, Poland
Dr. Boultif Ayache Larbi ben Mhidi University, Oum El Bouagui, Algeria
Prof. Janusz Badur Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Krzysztof Badyda Warsaw University of Technology, Poland
Prof. Rubina Bahar Universiti Tunku Abdul Rahman (UTAR), Malaysia
Dr. Ganesa Balamurugan NIT Trichy, India
Dr. Mariusz Banaszkiewicz Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Ali Cemal Benim Düsseldorf University of Applied Sciences, Germany
Dr. Prabhakar Bhandari KR Mangalam University, Gurgaon, India
Prof. Ryszard Białecki Silesian University of Technology, Gliwice, Poland
Prof. Sławomir Bielecki Warsaw University of Technology, Poland
Prof. Artur Błaszczuk Czestochowa University of Technology, Poland
Prof. Florin Bode Technical University of Cluj-Napoca, Romania
Prof. Shashidar Reddy Borra Sreenidhi Institute of Science and Technology, Hyderabad, India
Dr. Łukasz Breńkacz Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Zuzana Brodnianska Technical University of Zvolen, Slovakia
Prof. Wojciech Bujalski Warsaw University of Technology, Poland
Prof. Dariusz Butrymowicz Bialystok University of Technology, Poland
Prof. Ali J. Chamkha Kuwait College of Science and Technology, Kuwait
Dr. S. Chamoli Govind Ballabh Pant Institute of Engineering and Technology, Pauri Garhwal, India
Dr. Wentao Chen Kyushu Institute of Technology, South Korea
Dr. Ramesh Kumar Chidambaram Vellore Institute of Technology, India
Prof. Ata Chitsaz Urmia University, Iran
Prof. Tadeusz Chmielniak Silesian University of Technology, Gliwice, Poland
Prof. Rakesh Choubisa Birla Institute of Technology and Science, Pilani, India
Prof. Dorota Chwieduk Warsaw University of Technology, Poland
Prof. Janusz Cieśliński Gdańsk University of Technology, Poland
Prof. Piotr Cyklis Cracow University of Technology, Poland
Prof. Andaç Batur Çolak Niğde Ömer Halisdemir University, Turkey
Dr. Abdulmohsen Daham Alruwaili Jouf University, Sakaka, Saudi Arabia
Dr. Sindu Daniarta Wrocław University of Science and Technology, Poland
Prof. Maziar Dehghan Materials and Energy Research Centre, Tehran, Iran
Prof. David Denkenberger University of Canterbury, New Zealand
Dr. Vikram Dharodi West Virginia University, United States
Dr. Andres Diaz Diego Portales University, Chile
Prof. Piotr Doerffer Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Oktawia Dolna Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Alexandru Dumitrache Institute of Mathematical Statistics and Applied Mathematics of the Romanian Academy, Romania
Dr. Peter Durcansky University of Žilina, Slovakia
Dr. PP Dutta Tezpur (Central) University, India
Prof. Piotr Dzierwa Cracow University of Technology, Poland
Prof. S. Eiamsa-Ard Mahanakorn University of Technology, Thailand
Prof. Wael El-Maghlany Alexandria University, Egypt
Dr. Diana Enescu Valahia University of Targoviste, Romania
Prof. Mehmet Esen Firat University, Turkey
Dr. Alisson Figueiredo State University of Maranhao, Brazil
Dr. Elżbieta Fornalik-Wajs AGH University of Cracow, Poland
Dr. Irena Fryc Bialystok University of Technology, Poland
Prof. Piotr Furmański Warsaw University of Technology, Poland
Prof. Kotha Gangadhar Acharya Nagarjuna University, India
Dr. Abhishek Gautam Indian Institute of Technology, Bombay, India
Dr. Harish Ghritlahre Chhattisgarh Swami Vivekanand Technical University, Bhilai, Chhattisgarh, India
Prof. Antonia Gil University of Zaragoza, Spain
Dr. Bijjanal Gireesha Kuvempu University, India
Prof. Jerzy Głuch Gdańsk University of Technology, Poland
Prof. Sundararaj Joe Patrick Gnanaraj Francis Xavier Engineering College, India
Prof. Puru Gujrati University of Akron, OH, USA
Dr. Edison Gundabattini Vellore Institute of Technology, Tamil Nadu, India
Dr. Jafar Hasnain Islamia University of Bahawalpur, Pakistan
Dr. Shan Hu Anhui University, China
Prof. Ahmed Kadhim Hussein Babylon University, Iraq
Dr. Talla Hymavathikru Adikavi Nannaya University, India
Dr. Guillermo Ibáñez Universidad del Valle de México, Mexico
Dr. Maria Imtiaz National University of Medical Sciences, Pakistan
Prof. J. Iqbal COMSATS University Islamabad, Pakistan
Dr. Temjennaro Jamir Phek Government College, India
Dr. M.C. Jayaprakash University of Technology and Applied Sciences, Oman
Dr. Tomasz Kaczmarczyk Institute of Fluid-Flow Machinery Polish Academy of Sciences, Gdańsk, Poland
Dr. C. Kandilli Usak University, Turkey
Prof. Santhosh Kasula Sreyas Institute of Engineering and Technology, Hyderabad, India
Dr. Vikrant Katekar Indian Institute of Technology Bombay, India
Dr. Shivasheesh Kaushik Shivalik College of Engineering, Dehradun, India
Prof. Masood Khan Quaid-i-Azam University Islamabad, Pakistan
Prof. Muhammad Khan Department of Mathematics, Quaid-i-Azam University Islamabad, Pakistan
Prof. Adam Klimanek Silesian University of Technology, Gliwice, Poland
Prof. Michał Klugmann Gdańsk University of Technology, Poland
Prof. Ewa Klugmann-Radziemska Gdańsk University of Technology, Poland
Prof. Zbigniew Kneba Gdańsk University of Technology, Poland
Dr. Rafał Kobyłecki Czestochowa University of Technology, Poland
Prof. Raghunath Kodi Bheema Institute of Technology & Science, Adoni, India
Prof. Piotr Kolasiński Wrocław University of Technology, Faculty of Mechanical and Energy Engineering, Poland
Prof. Hemanta Konwar Kohima Science College, India
Prof. Roman Korab Silesian University of Technology, Gliwice, Poland
Dr. Hanna Koshlak Kielce University of Technology, Kielce, Poland
Dr. Wojciech Kosman Silesian University of Technology, Gliwice, Poland
Prof. Wojciech Kostowski Silesian University of Technology, Gliwice, Poland
Dr. Karol Kowal National Centre for Nuclear Research, Poland
Dr. Tomasz Kowalczyk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Jacek Kropiwnicki Gdańsk University of Technology, Poland
Dr. Zbigniew Krzemianowski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Vinay Kumar Central University of Jammu, India
Dr. Hubert Kuszewski Rzeszow University of Technology, Poland
Dr. Roman Kwidziński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Taynara Lago Federal University of Paraiba, João Pessoa, Brazil
Dr. Piotr Lampart Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. D. Landi University of Bergamo, Italy
Dr. Rafał Laskowski Warsaw University of Technology, Poland
Prof. Elisângela Leal Federal University of Ouro Preto, Minas Gerais, Brazil
Dr. Zhibao Li Institute of Process Engineering, Chinese Academy of Sciences, China
Dr. Grzegorz Ligus Opole University of Technology, Poland
Dr. Y.X. Liu School of Smart Health, Chongqing College of Electronic Engineering, Chongqing, China
Dr. Yuan Liu Nankai University, China
Prof. Oscar A. Lopez-Nunez Universidad Autónoma de Baja California, Mexico
Prof. Stanisław Łopata Cracow University of Technology, Poland
Prof. Artur Maciąg Kielce University of Technology, Poland
Prof. Paweł Madejski AGH University of Cracow, Poland
Dr. Afraz Hussain Majeed Jiangsu University, China
Prof. Oluwole D. Makinde South African National Biodiversity Institute, South Africa
Dr. Arkadiusz Małek University of Economics and Innovation in Lublin, Poland
Dr. Marat Margulis University of Derby, United Kingdom
Dr. Richard Matas University of West Bohemia, Pilsen, Czech Republic
Dr. Robert Matysko Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Fateh Mebarek-Oudina University of Skikda, Algeria
Prof. Łukasz Mika AGH University of Cracow, Poland
Prof. Galal Moatimid Ain Shams University, Egypt
Prof. M.M. Molla North South University, Bangladesh
Prof. Vedran Mrzljak Rijeka University, Croatia
Dr. Swati Mukhopadhyay The University of Burdwan, India
Dr. Md Nurun Nabi Central Queensland University, Australia
Dr. Vaithianathan Nadarajan Manakula Vinayagar Institute of Technology, Puducherry, Tamilnadu, India
Dr. Tameshwer Nath Indian Institute of Information Technology Bhagalpur, India
Dr. Piotr Nikończuk West Pomeranian University of Technology, Szczecin, Poland
Prof. Sandro Nizetic University of Split, Croatia
Prof. Lars Nord Norwegian University of Science and Technology, Trondheim, Norway
Dr. Srihari Notla Tranter Pvt LTD, Dallas, Texas, United States
Prof. Grzegorz Nowak Silesian University of Technology, Gliwice, Poland
Prof. Marzena Nowak-Ocłoń Cracow University of Technology, Poland
Prof. Paweł Ocłoń Cracow University of Technology, Poland
Prof. Mikołaj Oettingen AGH University of Cracow, Poland
Prof. Michael Ohadi University of Maryland, United States
Dr. Surender Ontela National Institute of Technology Kurukshetra, India
Dr. Łukasz Orman Kielce University of Technology, Poland
Dr. Sarangapani Palani Easwari Engineering College, Chennai, India
Dr. Alok Kumar Pandey Graphic Era Deemed University, Dehradun 248002, Uttarakhand, India
Dr. Paris Pasqualin University of Tokyo, Japan
Dr. Sebastian Pater Cracow University of Technology, Poland
Dr. Eugene Paulechka National Institute of Standards and Technology, Boulder, Colorado, USA
Dr. Sasa Pavlovic University of Niš, Serbia
Dr. Ewa Pelińska-Olko Wrocław University of Science and Technology, Poland
Dr. Martin Picón Núñez Universidad de Guanajuato, Mexico
Dr. Michał Piotrowicz Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Paricia Pizarro Madrid Institute for Advanced Study, Spain
Dr. Sylwia Polesek-Karczewska Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Naresh Poppathi Jawaharlal Nehru Technological University, Anantapur, India
Prof. B. Prabhakar Reddy University of Dodoma, Tanzania
Dr. Tomasz Przybyliński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Héctor Quinteros-Lama University of Talca, Chile
Prof. W. Quitiaquez Universidad Politécnica Salesiana, Ecuador
Dr. MD Rahman Birla Institute of Technology, India
Dr. Hussain Vali Rajammagari Malla Reddy College of Engineering and Technology, Hyderabad, India
Prof. Silvia Ravelli University of Bergamo, Italy
Dr. Jawad Raza Comsats University, Pakistan
Prof. Chandra Reddy Annamacharya University, Rajampet, Andhra Pradesh, India
Dr. Ahmed Refaie Ali Menoufia University, Egypt
Dr. Michel Kepes Rodrigues Federal University of Rio Grande, Brazil
Prof. Paweł Rózga Łódź University of Technology, Poland
Prof. Lazarus Rundora University of Limpopo, South Africa
Prof. Andrzej Rusin Silesian University of Technology, Gliwice, Poland
Prof. Artur Rusowicz Warsaw University of Technology, Poland
Dr. Bartłomiej Rutczyk Silesian University of Technology, Gliwice, Poland
Prof. Vasyl Ruzaikin National Aerospace University “KhAI”, Kharkov, Ukraine
Dr. Witold Rybiński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Andrzej Sachajdak Silesian University of Technology, Gliwice, Poland
Dr. Siniša Šadek University of Zagreb, Croatia
Dr. Somnath Santra National Institute of Technology Silchar, India
Prof. Robert Sekret Czestochowa University of Technology, Poland
Prof. N. Sethuraman IFET College of Engineering, Villupuram, Tamilnadu, India
Dr. Deepak Sharma National Institute of Technology, Hamirpur, India
Dr. Mohsen Sheikholeslami Babol Noshirvani University of Technology, Iran
Dr. Naresh Siddavatam Malla Reddy College of Engineering for Women, Hyderabad, India
Prof. Małgorzata Sikora Koszalin University of Technology, Poland
Dr. Tomasz Simla Silesian University of Technology, Gliwice, Poland
Dr. Ravi Singh National Institute of Technology Kurukshetra, India
Prof. Stasys Slavinskas Vytautas Magnus University, Lithuania
Dr. Sławomir Sładek Silesian University of Technology, Gliwice, Poland
Dr. Daniel Sławiński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Robert Smusz Rzeszow University of Technology, Poland
Prof. Krzysztof Sobczak Łódź University of Technology, Poland
Prof. Tomasz Sobota Cracow University of Technology, Poland
Prof. Wojciech Stanek Silesian University of Technology, Gliwice, Poland
Dr. Janusz Steller Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Sławomir Stelmach Institute of Energy and Fuel Processing Technology, Zabrze, Poland
Dr. Saravanan Subramani Sri Venkateswara College of Engineering, Sriperumbudur, India
Dr. Tomasz Suchocki Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Subbarama Suraparaju Universiti Malaysia Pahang Al-Sultan Abdullah, Malaysia
Prof. Srinivas Suripeddi Vellore Institute of Technology, India
Prof. Ireneusz Szczygieł Silesian University of Technology, Gliwice, Poland
Prof. Marcin Szega Silesian University of Technology, Gliwice, Poland
Dr. Gabor Szepesi University of Miskolc, Hungary
Prof. Andrzej Szlęk Silesian University of Technology, Gliwice, Poland
Dr. Jakub Szymiczek AGH University of Cracow, Poland
Dr. Kamil Śmierciew Bialystok University of Technology, Poland
Prof. Jan Taler Cracow University of Technology, Poland
Prof. Tolga Taner Aksaray University, Turkey
Prof. R. Thamizhvel IFET College of Engineering, Villupuram, Tamilnadu, India
Dr. Junxing Tian Shenyang Jianzhu University, China
Prof. Fernando Toapanta-Ramos Universidad Politecnica Salesiana, Ecuador
Dr. Viktor Trokhaniak National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine
Prof. Cameron Tropea Technical University of Darmstadt, Germany
Prof. Mustafa Turkyilmazoglu University of Hacettepe, Ankara, Turkey
Dr. M.N. Ugural Istanbul Kultur University, Turkey
Dr. Igri Uket Samabot Engineering, Nigeria
Prof. A. Ustaoglu Bartin University, Turkey
Prof. Petar Varbanov Brno University of Technology, Czech Republic
Prof. Jan Wajs Gdansk University of Technology, Poland
Dr. Haoyu Wang China Fire and Rescue Institute
Dr. Hassan Waqas Wuhan University of Technology, China
Dr. Izabela Wardach-Święcicka Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Marek Wasilewski Opole University of Technology, Poland
Dr. Bohdan Węglowski Cracow University of Technology, Poland
Prof. Sławomir Wierzbicki University of Warmia and Mazury in Olsztyn, Poland
Prof. Bogusław Więcek Lodz University of Technology, Poland
Dr. Sławomir Wiśniewski West Pomeranian University of Technology, Szczecin, Poland
Prof. Stanisław Witczak Opole University of Technology, Poland
Dr. Jerzy Wołoszyn AGH University of Cracow, Poland
Dr. Grzegorz Woroniak Bialystok University of Technology, Poland
Dr. Sridhar Wuriti Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, India
Prof. Dhananjay Yadav University of Nizwa, Oman
Dr. Surendra Yadav K R Mangalam University, Gurugram, India
Prof. Hairui Yang Tsinghua University, China
Prof. Mohamed Younes Kafrelsheikh University, Egypt
Dr. Peiyuan Yu Chang’an University, China
Dr. Bartosz Zajączkowski Wrocław University of Technology, Poland
Dr. Zbigniew Zapałowicz West Pomeranian University of Technology, Szczecin, Poland
Prof. Bahman Zarenezhad Semnan University, Iran
Prof. Bernard Zawada Warsaw University of Technology, Poland
Prof. Ahmed Zeeshan International Islamic University Islamabad, Pakistan
Prof. Ron Zevenhoven Åbo Akademi University, Finland
Dr. Wei Zhang Ningbo Polytechnic, China
Prof. Y.L. Zhou University of Science and Technology of China, China
Dr. Alexander Zhuravlyov Luikov Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus
Prof. Wiesław Zima Cracow University of Technology, Poland
Prof. Mirosław Żukowski Bialystok University of Technology, Poland
List of Reviewers (2024)
Prof. Ibrahim Abbas Sohag University, Egypt
Dr. Ezzaalouni Abdellaoui National Engineering School of Tunis, Tunisia
Prof. Mahmoud Aly Abdelraheem South Valley University, Saudi Arabia
Dr. Aissa Abderrahmane University of Mascara, Algeria
Prof. Wojciech Adamczyk Silesian University of Technology, Gliwice, Poland
Dr. Faraz Afshari Department of Mechanical Engineering, Erzurum Technical University, Turkey
Prof. Mohamad Ahamat University of Kuala Lumpur, Malaysia
Dr. Kadhim Al-Chlaihawi University of Al-Qadisiyah, Iraq
Dr. Tabish Alam CSIR-Central Building Research Institute, Roorkee, India
Dr. Ahmed Albdoor Southern Technical University, Iraq
Prof. Ramzan Ali University of Doha for Science and Technology, Qatar
Dr. Shafqat Ali Univeristy of L'Aquila, Italy
Dr. José A. Almendros-Ibáñez Renewable Energy Research Institute, Albacete, Spain
Dr. Łukasz Amanowicz Poznań University of Technology, Poland
Dr. Gautam Anand Indian Institute of Engineering Science and Technology, Shibpur, India
Prof. Artur Andruszkiewicz Wrocław University of Science and Technology, Poland
Dr. Aziz Ullah Awan University of Punjab, Lahore, Pakistan
Dr. Boultif Ayache University of Oum El Bouaghi, Algeria
Prof. Khorsi Azzeddine University of Oran, Algeria
Prof. Viswanath Babu Indian Institute of Technology, Bombay, India
Prof. Janusz Badur Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Krzysztof Badyda Warsaw University of Technology, Poland
Prof. Jerzy Banaszek Warsaw University of Technology, Poland
Prof. Ali Cemal Benim Düsseldorf University of Applied Sciences, Germany
Dr. Prabhakar Bhandari KR Mangalam University, Gurugram, India
Prof. Ryszard Białecki Silesian University of Technology, Gliwice, Poland
Dr. Jacek Biskupski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Przemysław Błasiak Wrocław University of Science and Technology, Poland
Prof. Artur Błaszczuk Częstochowa University of Technology, Poland
Prof. Florin Bode Technical University of Cluj-Napoca, Romania
Prof. Tadeusz Bohdal Koszalin University of Technology, Poland
Dr. Václav Boucek Czech Technical University in Prague
Dr. Anna Bryszewska-Mazurek Wrocław University of Science and Technology, Poland
Prof. Wojciech Bujalski Warsaw University of Technology, Poland
Prof. Dariusz Butrymowicz Białystok University of Technology, Poland
Dr. Laura Canale University of Cassino and Southern Lazio, Italy
Dr. Artur Cebula Cracow University of Technology, Poland
Prof. Ali J. Chamkha Kuwait College of Science and Technology, Kuwait
Prof. Himadri Chattopadhyay Jadavpur University, India
Dr. Ping Chen Huanghuai University, China
Dr. Wentao Chen Kyushu Institute of Technology, South Korea
Dr. Zhikun Chen North China University of Science and Technology, Hebei, China
Prof. Tadeusz Chmielniak Silesian University of Technology, Gliwice, Poland
Prof. Dorota Chwieduk Warsaw University of Technology, Poland
Prof. Piotr Cyklis Cracow University of Technology, Poland
Prof. Tomasz Czakiert Częstochowa University of Technology, Poland
Prof. Rahmat Ellahi University of California, Riverside, USA
Dr. Diana Enescu Valahia University of Targoviste, Romania
Prof. Mehmet Esen Firat University, Turkey
Prof. Mohamed Fahmy Umm Al-Qura University, Saudi Arabia
Prof. Paweł Flaszyński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Elżbieta Fornalik-Wajs AGH University of Krakow, Poland
Dr. Andrzej Frąckowiak Poznan University of Technology, Poland
Prof. Piotr Furmański Warsaw University of Technology, Poland
Prof. Kotha Gangadhar Acharya Nagarjuna University, India
Prof. Reyes García Contreras Universidad de Castilla-La Mancha, Spain
Prof. Jerzy Głuch Gdańsk University of Technology, Poland
Prof. Mofid Gorji-Bandpy Babol Noshirvani University of Technology, Iran
Prof. Sławomir Grądziel Cracow University of Technology, Poland
Dr. Katarzyna Grochowska Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Teodor Grosan Babes Bolyai University, Cluj-Napoca, Romania
Prof. Artur Gutkowski Łódź University of Technology, Poland
Dr. Tomasz Hajduk Gdynia Maritime University, Poland
Dr. Tomasz Hałon Wrocław University of Science and Technology, Poland
Prof. Zbigniew Hanzelka AGH University of Krakow, Poland
Dr. Jafar Hasnain Islamia University of Bahawalpur, Pakistan
Dr. Bartłomiej Hernik Silesian University of Technology, Gliwice, Poland
Dr. Sylwia Hożejowska Kielce University of Technology, Poland
Prof. Ahmed Kadhim Hussein Babylon University, Iraq
Dr. Talla Hymavathikru Adikavi Nannaya University, India
Prof. Ion Ion “Dunărea de Jos” Universitaty of Galați, Romania
Prof. Jean Ituna-Yudonago Metropolitan Polytechnic University of Hidalgo, Mexico
Dr. Piotr Jasiński Gdańsk University of Technology, Poland
Dr. Tomasz Kaczmarczyk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Jacek Kalina Silesian University of Technology, Poland
Dr. Selvakumar Kamalanathan National Institute of Technology, Tiruchirappalli, India
Dr. P. Rajesh Kanna Vellore Institute of Technology, India
Dr. Łukasz Kapusta Warsaw University of Technology, Poland
Dr. Nikolaos Karkalos National Technical University of Athens, Greece
Dr. Jarosław Karwacki Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Alain Kassab University of Central Florida, United States
Dr. Shivasheesh Kaushik Shivalik College of Engineering, Dehradun, India
Prof. Kamik Kaygusuz Karadeniz Technical University, Turkey
Dr. Ahmet Keskin Abant Izzet Baysal Universty, Turkey
Prof. Muhammad Khan Quaid-I-Azam University, Islamabad, Pakistan
Prof. Ataollah Khanlari Tarsus University, Turkey
Prof. Adam Klimanek Silesian University of Technology, Gliwice, Poland
Dr. Venkateswara Raju Konduru Sri Venkateswara College of Engineering, Srīperumbūdūr, India
Dr. Hanna Koshlak Kielce University of Technology, Poland
Prof. Wojciech Kostowski Silesian University of Technology, Gliwice, Poland
Dr. Tomasz Kowalczyk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Tomasz Kowalewski Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
Dr. Waldemar Kuczyński Koszalin University of Technology, Poland
Dr. Raj Kumar Gachon University, Seongnam, South Korea
Dr. Roman Kwidziński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Piotr Lampart Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Agnieszka Lechowska Cracow University of Technology, Poland
Dr. Sanqiu Liu Zhejiang University of Technology, China
Dr. Y.X. Liu Chongqing College of Electronic Engineering, China
Prof. Marcin Łuczak Gdańsk University of Technology, Poland
Dr. Paweł Madejski AGH University of Krakow, Poland
Dr. Mirosław Majkut Silesian University of Technology, Gliwice, Poland
Dr. Marat Margulis University of Derby, United Kingdom
Prof. Pavlo Maruschak Ternopil Ivan Pul'uj National Technical University, Ukraine
Dr. Robert Matysko Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Gerard McGranaghan Atlantic Technological University, Ireland
Prof. Fateh Mebarek-Oudina University of Skikda, Algeria
Dr. Wojciech Miąskowski University of Warmia and Mazury in Olsztyn, Poland
Prof. Dariusz Mikielewicz Gdańsk University of Technology, Poland
Prof. Jarosław Milewski Warsaw University of Technology, Poland
Dr. Durgesh Mishra Hindustan Institute of Technology and Science, India
Dr. Agata Mlonka-Mędrala AGH University of Krakow, Poland
Prof. Moghtada Mobedi Shizuoka University, Japan
Prof. Abdolreza Moghadassi Arak University, Iran
Prof. M.M. Molla North South University, Bangladesh
Prof. Vedran Mrzljak Rijeka University, Croatia
Dr. Ebrahim Nadimi Silesian University of Technology, Gliwice, Poland
Dr. Łukasz Niedźwiecki Wroclaw University of Science and Technology, Poland
Dr. Artem Nikulin Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Spain
Dr. Acharya Nilankush University of Calcutta, India
Prof. Sandro Nizetic University of Split, Croatia
Prof. Grzegorz Nowak Silesian University of Technology, Gliwice, Poland
Prof. Marzena Nowak-Ocłoń Cracow University of Technology, Poland
Prof. Tomasz Ochrymiuk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Dilek Ozen Necmettin Erbakan University, Turkey
Prof. Arturo Pacheco-Vega California State University, United States
Dr. Nicolas Pailahueque University of Santiago, Chile
Prof. Andrzej Panas Military University of Technology, Poland
Dr. Alok Kumar Pandey Graphic Era Deemed University, Dehradun, Uttarakhand, India
Dr. Sebastian Pater Cracow University of Technology, Poland
Dr. Sasa Pavlovic University of Niš, Serbia
Prof. Bengisen Pekmen TED University, Ankara, Turkey
Prof. Magdalena Piasecka Kielce University of Technology, Poland
Prof. George Pichurov Technical University of Sofia, Bulgaria
Prof. Sylwia Polesek-Karczewska Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Jacek Pozorski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. A. Sathiya Priya Anna University - Madras Institute of Technology, Chennai, India
Dr. Tomasz Przybyliński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Durgaprasad Putta Sree Vidyanikethan Engineering College in Tirupati, Andhra Pradesh, India
Prof. Nikolai Radchenko Mykolayiv Marine University, Ukraine
Dr. Piotr Radomski Gdańsk University of Technology, Poland
Dr. Hussain Vali Rajammagari Malla Reddy College of Engineering and Technology, Hyderabad, India
Prof. Ahmad Rashad Aswan University, Egypt
Prof. Majid Rashidi Huyeh University of Sistan and Baluchestan, Iran
Paulina Rolka Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Andrzej Rusin Silesian University of Technology, Gliwice, Poland
Prof. Artur Rusowicz Warsaw University of Technology, Poland
Dr. Bartłomiej Rutczyk Silesian University of Technology, Gliwice, Poland
Dr. Marcin Rywotycki AGH University of Krakow, Poland
Dr. Andrzej Sachajdak Silesian University of Technology, Gliwice, Poland
Dr. Siniša Šadek University of Zagreb, Croatia
Prof. Nabil Saffaj Ibn Zohr University, Agadir, Morocco
Prof. Robert Sekret Częstochowa University of Technology, Poland
Dr. Karol Seweryn Space Research Centre, Polish Academy of Sciences, Poland
Dr. Nehad Ali Shah Sejong University, South Korea
Prof. Zahir Shah University of Lakki Marwat, Khyber Pakhtunkhwa, Pakistan
Dr. Xiangmin Shao Zhengzhou University of Industrial Technology, China
Dr. Deepak Sharma National Institute of Technology, Hamirpur, India
Dr. Sachin Sharma UPES School of Advanced Engineering, Dehradun, India
Dr. Sachin Shaw Botswana International University of Science and Technology, Botswana
Prof. Igor Shevchuk Technische Hochschule Köln, Germany
Prof. Shailendra Kumar Shukla Indian Institute of Technology (Banaras Hindu University), Varanasi, India
Dr. Małgorzata Sikora Koszalin University of Technology, Poland
Dr. Tej Singh
Prof. V. Sivakumar Ramco Institute of Technology, India
Prof. Jan Skočilas Czech Technical University, Czech Republic
Dr. Daniel Sławiński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Slawomir Smolen Hochschule Bremen, Germany
Prof. Wojciech Sobieski University of Warmia and Mazury in Olsztyn, Poland
Dr. Janusz Steller Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Pascal Stouffs University of Pau & Pays Adour, France
Prof. Giedrė Streckienė Vilnius Gediminas Technical University, Lithuania
Dr. Jana Šugárová Slovak University of Technology, Slovakia
Dr. Jeyakumar Suppandipillai Kalasalingam Academy of Research and Education, India
Prof. Ireneusz Szczygieł Silesian University of Technology, Gliwice, Poland
Dr. Gabor Szepesi University of Miskolc, Hungary
Prof. Andrzej Szlęk Silesian University of Technology, Gliwice, Poland
Dr. Karol Sztekler AGH University of Krakow, Poland
Prof. Ryszard Szwaba Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Kamil Śmierciew Białystok University of Technology, Poland
Prof. Jan Taler Cracow University of Technology, Poland
Prof. Tolga Taner Aksaray University, Turkey
Dr. Lin Tao University of Science and Technology Liaoning, Anshan, China
Dr. Mohammad Tauviqirrahman Diponegoro University, Indonesia
Dr. Ana Tejero-González University of Valladolid, Spain
Dr. Junxing Tian Shenyang Jianzhu University, China
Prof. Marcin Trojan Cracow University of Technology, Poland
Dr. Dung Trong
Prof. Ewa Tuliszka-Sznitko Poznań University of Technology, Poland
Dr. Azim Tuncer Burdur Mehmet Akif Ersoy University, Turkey
Dr. Michele Tunzi Technical University of Denmark
Prof. Mustafa Turkyilmazoglu Hacettepe University, Ankara, Turkey
Prof. Wojciech Tutak Częstochowa University of Technology, Poland
Prof. Artur Tyliszczak Częstochowa University of Technology, Poland
Prof. Petar Varbanov Brno University of Technology, Czech Republic
Prof. Tomas Vit Technical University of Liberec, Czech Republic
Prof. Jan Wajs Gdańsk University of Technology, Poland
Dr. Haoyu Wang China Fire and Rescue Institute
Dr. Jiaxin Wang Beijing Polytechnic, China
Prof. Sebastian Werle Silesian University of Technology, Gliwice, Poland
Dr. Sławomir Wiśniewski West Pomeranian University of Technology, Szczecin, Poland
Dr. Łukasz Witanowski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Stanisław Witczak Opole University of Technology, Poland
Dr. Artur Wodołażski Central Mining Institute - National Research Institute, Poland
Dr. Grzegorz Woroniak Bialystok University of Technology, Poland
Dr. Rafał Wyczółkowski Częstochowa University of Technology, Poland
Dr. Pramod Yadav Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India
Prof. Yanxia Yin Shandong University of Science and Technology, China
Dr. K.L. Yusuf Ahmadu Bello University, Nigeria
Dr. Robert Zarzycki Częstochowa University of Technology, Poland
Dr. Y.L. Zhou University of Science and Technology of China
Dr. Yunlong Zhou School of Electrical Engineering of Yancheng Institute of Technology, China
Prof. Wiesław Zima Cracow University of Technology, Poland
Dr. Paweł Ziółkowski Gdańsk University of Technology, Poland
Prof. Janusz Zmywaczyk Warsaw Military Academy, Poland
List of Reviewers (2023)
Prof. Ibrahim Abbas Sohag University, Egypt
Dr. Aissa Abderrahmane University of Mascara, Algeria
Dr. Wojciech Adamczyk Silesian University of Technology, Poland
Prof. Ramzan Ali University of Doha for Science and Technology, Qatar
Prof. Ahmed Alsaedi King Abdulaziz University, Saudi Arabia
Prof. Mohamed Alwaeli Silesian University of Technology, Poland
Dr. Łukasz Amanowicz Poznan University of Technology, Poland
Prof. Rafał Andrzejczyk Gdańsk University of Technology, Poland
Dr. Adnan Asghar Universiti Utara Malaysia, Malaysia
Prof. Jurij Avsec University of Maribor, Slovenia
Dr. Alberto Badias Higher Technical School of Industrial Engineering, Polytechnic University of Madrid, Spain
Prof. Janusz Badur Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Krzysztof Badyda Warsaw University of Technology, Poland
Dr. Paweł Bagiński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Paolo Blecich University of Rijeka, Croatia
Dr. Przemysław Błasiak Wrocław University of Science and Technology, Poland
Prof. Artur Błaszczuk Częstochowa University of Technology, Poland
Prof. Tadeusz Bohdal Koszalin University of Technology, Poland
Dr. Łukasz Breńkacz Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Wojciech Bujalski Warsaw University of Technology, Poland
Prof. Dariusz Butrymowicz Białystok University of Technology, Poland
Dr. Rodrigo Cáceres González Diego Portales University, Chile
Prof. Unal Camdali Ankara Yildirim Beyazit University, Turkey
Dr. Artur Cebula Cracow University of Technology, Poland
Prof. Adam Cenian Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Patryk Chaja Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Ali J. Chamkha Kuwait College of Science and Technology, Kuwait
Dr. S. Chamoli Govind Ballabh Pant Institute of Engineering and Technology, Pauri Garhwal, India
Dr. Xuerui Chang Nanyang Institute of Technology, China
Prof. Tadeusz Chmielniak Silesian University of Technology, Gliwice, Poland
Dr. Gautam Choubey IITRAM Ahmadabad, India
Dr. David Santosh Christopher Wolaita Soda University, Ethiopia
Prof. Dorota Chwieduk Warsaw University of Technology, Poland
Prof. Janusz Cieśliński Gdańsk University of Technology, Poland
Prof. Piotr Cisek Cracow University of Technology, Poland
Dr. Andaç Batur Çolak Istanbul Commerce University, Turkey
Prof. Marian Czapp Koszalin University of Technology, Poland
Prof. Krystian Czernek Opole University of Technology, Poland
Dr. Vijayakanthan Damodaran University of Windsor, India
Prof. Fadi Dohnal Vorarlberg University of Applied Sciences, Austria
Dr. Kamil Duda University of Warmia and Mazury in Olsztyn, Poland
Prof. Piotr Duda Cracow University of Technology, Poland
Dr. Waldemar Dudda University of Warmia and Mazury in Olsztyn, Poland
Dr. Peter Durcansky University of Žilina, Slovakia
Prof. Krzysztof Dutkowski Koszalin University of Technology, Poland
Dr. Bogdan Dziadak Warsaw University of Technology, Poland
Prof. Piotr Dzierwa Cracow University of Technology, Poland
Prof. S. Eiamsa-Ard Mahanakorn University of Technology (MUT), Thailand
Dr. Diana Enescu Valahia University of Targoviste, Romania
Prof. Mehmet Esen Firat University, Turkey
Prof. Mohamed Fahmy Umm Al-Qura University, Saudi Arabia
Dr. Girauld Florine Polytech Annecy Chambery, France
Prof. Andrzej Frąckowiak Poznan University of Technology, Poland
Prof. Piotr Furmański Warsaw University of Technology, Poland
Dr. Roberto Garay-Martinez Institute of Technology, University of Deusto, Spain
Dr. Abhishek Gautam Indian Institute of Technology, Bombay, India
Dr. Mohammad Ghaemi Gdańsk University of Technology, Poland
Dr. Michał Gliński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Katarzyna Grochowska Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Andrzej Grzebielec Warsaw University of Technology, Poland
Dr. Bartłomiej Hernik Silesian University of Technology, Gliwice, Poland
Prof. Dirk Hübner University of Applied Sciences, Saarbrücken, Germany
Prof. Ahmed Kadhim Hussein Babylon University, Iraq
Prof. Yulia Ivashko Kyiv National University of Construction and Architecture, Ukraine
Dr. Marcin Jankowski AGH University of Krakow, Poland
Prof. Marek Jaszczur AGH University of Krakow, Poland
Dr. Kirill Kabalyk Łódź University of Technology, Poland
Dr. Tomasz Kaczmarczyk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Natthaporn Kaewchoothong Prince of Songkla University, Thailand
Prof. Jacek Kalina Silesian University of Technology, Gliwice, Poland
Prof. Rajesh Kanna Velammal College of Engineering and Technology, Madurai, India
Dr. Łukasz Kapusta Warsaw University of Technology, Poland
Prof. Dariusz Kardaś Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Nikolaos Karkalos National Technical University of Athens, Greece
Dr. Jarosław Karwacki Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Muhammad Khan Quaid-i-Azam University, Islamabad, Pakistan
Prof. Rafał Kobyłecki Częstochowa University of Technology, Poland
Prof. Piotr Kolasiński Wrocław University of Technology, Poland
Dr. Hanna Koshlak Kielce University of Technology, Poland
Dr. Anita Kovač-Kralj University of Maribor, Slovenia
Prof. Tadeusz Kruczek Silesian University of Technology, Gliwice, Poland
Dr. Zbigniew Krzemianowski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Jarosław Krzywański Jan Długosz University in Częstochowa, Poland
Prof. Waldemar Kuczyński Koszalin University of Technology, Poland
Dr. Roman Kwidziński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Piotr Lampart Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Ramoshweu Solomon Lebelo Vaal University of Technology, South Africa
Dr. Michał Lewandowski Norwegian University of Science and Technology, Trondheim, Norway
Dr. Hejian Liu Guangzhou University, China
Dr. Qiang Liu China University of Petroleum, China
Zhenling Liu Nantong Institute of Technology, China
Dr. Babak Lofti Lund University, Sweden
Prof. Artur Maciąg Kielce University of Technology, Poland
Dr. Paweł Madejski AGH University of Krakow, Poland
Dr. Rudrodip Majumdar School of Natural Sciences and Engineering, National Institute of Advanced Studies, India
Dr. Janusz Marchwiński University of Ecology and Management in Warsaw, Poland
Prof. Andrew Martin Royal Institute of Technology, Sweden
Dr. Robert Matysko Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Fateh Mebarek-Oudina University of Skikda, Algeria
Prof. Łukasz Mika AGH University of Krakow, Poland
Prof. Dariusz Mikielewicz Gdańsk University of Technology, Poland
Prof. Jarosław Mikielewicz Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Jarosław Milewski Warsaw University of Technology, Poland
Dr. Durgesh Mishra Hindustan Institute of Technology and Science, India
Dr. Agata Mlonka-Mędrala AGH University of Krakow, Poland
Prof. Moghtada Mobedi Shizuoka University, Japan
Prof. M.M. Molla North South University, Bangladesh
Prof. Tatjana Morozyuk Technical University of Berlin, Germany
Prof. Mohammed Amine Moussaoui Mohammed 1st University, Morocco
Prof. Vedran Mrzljak Rijeka University, Croatia
Dr. Sebastian Muntean Center for Fundamental and Advanced Technical Research, Romanian Academy - Timisoara Branch, Romania
Dr. Jiyaul Mustafa School of Engineering & Applied Sciences, Bennett University, India
Dr. Aggrey Mwesigye University of Calgary, Canada
Dr. Ebrahim Nadimi Silesian University of Technology, Gliwice, Poland
Prof. Gabriel Negreanu Politehnica University of Bucharest, Bucharest, Romania
Prof. Arian Nijmeijer University of Twente, Enschede, Netherlands
Dr. Acharya Nilankush University of Calcutta, India
Prof. Sandro Nizetic University of Split, Croatia
Prof. Marek Ochowiak Poznań University of Technology, Poland
Prof. Tomasz Ochrymiuk Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Paweł Ocłoń Cracow University of Technology, Poland
Prof. Igor Orynyak National Technical University of Ukraine, Kyiv, Ukraine
Prof. Tadeusz Orzechowski Kielce University of Technology, Poland
Prof. Ziemowit Ostrowski Silesian University of Technology, Gliwice, Poland
Dr. Dilek Ozen Necmettin Erbakan University, Turkey
Dr. Swapan Kumar Pandit Visva Bharati University, India
Prof. José Alberto Reis Parise Pontifícia Universidade Católica do Rio de Janeiro, Brazil
Prof. Anatoliy Michael Pavlenko Kielce University of Technology, Poland
Dr. Sasa Pavlovic University of Niš, Serbia
Prof. Magdalena Piasecka Kielce University of Technology, Poland
Prof. Sławomir Pietrowicz Wroclaw University of Science and Technology, Poland
Prof. Mieczysław Porowski Poznan University of Technology, Poland
Prof. Jacek Pozorski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Prof. Grzegorz Przybyła Silesian University of Technology, Gliwice, Poland
Dr. Tomasz Przybyliński Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Durgaprasad Putta Sree Vidyanikethan Engineering College, India
Prof. Nikolai Radchenko Mykolayiv Marine University, Ukraine
Dr. Mario Raddatz Technical University of Dresden, Germany
Dr. Krzysztof Rafał Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Ravi Ranjan National Institute of Technology, Patna, India
Prof. Silvia Ravelli University of Bergamo, Italy
Dr. M.G. Reddy Acharya Nagarjuna University, India
Prof. Artur Rusowicz Warsaw University of Technology, Poland
Dr. Bartłomiej Rutczyk Silesian University of Technology, Gliwice, Poland
Dr. Marcin Rywotycki AGH University of Krakow, Poland
Dr. Mukesh Sahu Kalinga University, Naya Raipur, India
Dr. Daniel Sánchez García-Vacas Jaume I University, Spain
Dr. Ndolane Sene Cheikh Anta Diop University, Senegal
Dr. Deepak Sharma National Institute of Technology, Hamirpur, India
Dr. S.A. Shehzad COMSAT University, Islamabad, Pakistan
Dr. D.N. Shivappa The Oxford College of Engineering, Bengaluru, India
Dr. Małgorzata Sikora Koszalin University of Technology, Poland
Prof. V. Sivakumar Ramco Institute of Technology, India
Prof. Elżbieta Sobiecka Łódź University of Technology, Poland
Prof. Andrzej Sobiesiak University of Windsor, Canada
Prof. Wojciech Stanek Silesian University of Technology, Gliwice, Poland
Prof. Vladimir Stevanovic University of Belgrade, Serbia
Prof. Ireneusz Szczygieł Silesian University of Technology, Gliwice, Poland
Dr. Gabor Szepesi University of Miskolc, Hungary
Prof. Andrzej Szlęk Silesian University of Technology, Gliwice, Poland
Dr. Karol Sztekler AGH University of Krakow, Poland
Dr. Kamil Śmierciew Białystok University of Technology, Poland
Prof. David Taler Cracow University of Technology, Poland
Prof. Jan Taler Cracow University of Technology, Poland
Prof. Tolga Taner Aksaray University, Turkey
Prof. Ana Tejero-González University of Valladolid, Spain
Dr. Junxing Tian Shenyang Jianzhu University, China
Prof. Wojciech Tutak Częstochowa University of Technology, Poland
Prof. Nguyen Van Toan Micro System Integration Center, Tohoku University, Japan
Dr. Saket Verma Birla Institute of Technology and Science, India
Prof. Jan Wajs Gdańsk University of Technology, Poland
Dr. Haoyu Wang China Fire and Rescue Institute
Dr. Izabela Wardach-Święcicka Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Gdańsk, Poland
Dr. Daniel Węcel Silesian University of Technology, Gliwice, Poland
Prof. Bohdan Węglowski Cracow University of Technology, Poland
Prof. Sławomir Wierzbicki University of Warmia and Mazury in Olsztyn, Poland
Dr. Artur Wodołażski Central Mining Institute - National Research Institute, Poland
Dr. Haining Xie Beijing Institute of Technology, China
Dr. Huabing Xie Guangzhou University, China
Prof. Weibo Yang School of Hydraulic, Energy and Power Engineering, Yangzhou University, China
Prof. Zbigniew Zapałowicz West Pomeranian Unversity of Technology in Szczecin, Poland
Prof. Ron Zevenhoven Åbo Akademi University, Turku, Finland
Dr. Chunrong Zhao Sydney University, Australia
Dr. Qiao Zhao Qinghai Normal University, China
Dr. Y.L. Zhou University of Science and Technology of China
Dr. Wiesław Zima Cracow University of Technology, Poland
Dr. Paweł Ziółkowski Gdańsk University of Technology, Poland
Prof. Janusz Zmywaczyk Warsaw Military Academy, Poland
Prof. Zbigniew Żmudka Silesian University of Technology, Gliwice, Poland